Frequently Asked Question

How do I pair my bluetooth headset?
Last Updated 2 years ago

On The Sangoma Phone
  1. Press the Menu button on the bottom right of the main display screen
    image
  2. Use the arrow navigation panel to navigate to the Settings option, and press Enter (or the check mark button in the center of the navigation arrow keys)
    image
  3. Select Basic Settings and press Enterimage
  4. Navigate down to the Bluetooth menu option and press Enter
    image
  5. On this screen, if the phone says that bluetooth is on, follow the next sub-steps, otherwise skip to step 6
    1. Press the Switch option to turn bluetooth on
    2. Press the Save button to ensure that bluetooth is on
      image
    3. Press the Back button to return to the menu screen and action the save
    4. Select the Bluetooth menu option
  6. On your headset, press and hold the bluetooth activation button until the indicator light begins to flash blue/red
    imageimage
  7. Select option #2 Paired Bluetooth Device and press the Scan button on the bottom of the phone screen
    image
  8. The phone will look for any bluetooth devices looking to pair. An MPOW device should show up.
  9. Press the Connect button on the bottom right of the phone
    image
  10. When you return to the main screen, the phone should now indicate that there is a bluetooth device connected
    image

You also need to ensure that you have activated headset mode on your phone. This is done by pressing the

image-1551136659599.png

button on the phone

Please Wait!

Please wait... it will take a second!